In a period stairwell in Berlin-Pankow a baluster was missing from the wooden banister – with an original from the time the building went up, that’s not something you pick up at the DIY shop. We took one of the existing balusters as a pattern, took off its profile and dimensions and turned the piece […]
Here we restored an extending dining table. The old finish was in very poor condition. There were also burn marks in the lacquer and a few chipped spots. The particular challenge, though, was keeping the wood surface showing through, even though the table veneer was made up of different materials. The table was completely stripped […]
Here a fitted kitchen was installed and a worktop made from 40 mm thick birch plywood (multiplex).
This heavy-duty machine bench can take a load of around a tonne and was built entirely from leftover materials. The mortiser with its cast-iron table, which has found a home on it, isn’t quite that heavy, mind you. The four 60cm-deep drawers can each be loaded with 50kg too. So plenty of room for lots […]
A customer in Berlin wanted plenty of space and storage. To go with his furnishings, the fronts were to be limed oak, which we achieved here with veneered chipboard and ABS edging.
The brief was a hallway cupboard that almost disappears into the wall. Plus plenty of storage and a compartment for a 2.6m ladder. Built with white veneered chipboard, stainless steel handles and scribed to the wall. The cupboard is 3.28m high.
Something small for a change: the job was to hide the router, phone and aerial.
A Berlin law firm needed considerably more space for special archive boxes. It’s a simple, purpose-built construction made from veneered furniture board.
Made-to-measure bookcase for a stairway (pine/linseed oil):
Lots of work tables for fitting out a new floor. These desks with a worktop of 1480x1480mm give 2 members of staff each plenty of room. One requirement for the tables was maximum legroom, combined with the option of putting the tables flush up against each other. They also had to be able to be […]
For a very successful Berlin advertising agency, here 2 refectory tables with 12 stools. To match the rest of the furniture design, the materials are mild steel with clear lacquer and birch plywood with linseed oil. It really fits the premises superbly, and the birch, with its grain brought to the fore, is a real […]
Function: The file trolley is built in modules. Workstations that need more space can also stack 4 or 5 modules together, others fewer. The shelves are designed so that folders can be pulled out without having to be lifted over the metal edge that runs round them. The top, however, is designed as a surface […]
Fine combination. Hammered-finish paint on the kitchen combined with a 40mm birch plywood worktop. Sealed watertight with neutral wax. In this case the grain isn’t brought out. The worktop has a silky sheen.
Here a table with 7cm thick oak planks. To match, 60x40mm black steel. To get more width, the table has a stained pine plank set in down the middle. The table is also height-adjustable by 7cm thanks to adjustable feet.