Besides taking down the old weathered fence and cutting back the hedge, a new fence was put up here. 12 gates were made to the customer’s design.
220 m lattice fence (Jägerzaun-style) with 12 garden gates
-
Box sash windows sealed – tubular seals routed into 15 sashes
-
Crumbling clinker brick step rebuilt
-
Missing baluster turned to match
-
Box windows reglazed – three examples in 4 mm float glass
-
Asbestos cement roof dismantled – 6 × 50 m shed roof in Löwenberger Land
-
Glass wall replaced with insulated timber wall – 5 × 2.60 m in stud frame construction
-
Coupled veranda door reglazed – holiday home in northern Sweden
-
Crown reduction box elder rigging
-
Refurbishment of 8 garage doors
-
Restoration of two park benches
Timber façade made to a design specification and fitted with sub-frame.
Here’s another timber façade, which we made from softwood to a design specification and fitted. The elements were given tongue-and-groove joints, a decorative edge and a rounded design with a drip edge.
Asbestos + steel beam removal
This was about dismantling a design feature made of a steel structure, which was bolted or concreted in between a multi-storey car park and the wall of a house.
Fence with garden gate and intercom post
A smaller fence with a garden gate and a post that had to house an intercom.
Tree climbing felling
Tree climbing felling (sectional dismantling), close to the house and shed, of two pines – with somewhat more demanding climbing because of the trunks’ awkward shape.
Tree climbing felling, fully lowered by rope (rigging)
With this non-native fir, the problem was that it was already leaning over 2 roofs. There was no longer any room to drop the pieces, as everything around it had been built up. So everything had to be lowered by rope.
Fence with 5 gates modelled on the historic original
Large fence, around 140 m long, with 5 gates in 2 different designs. Fences and gates were made and fitted by us, modelled on the historic original.
Fitted kitchen installation incl. making the worktop
Here a fitted kitchen was installed and a worktop made from 40 mm thick birch plywood (multiplex).
Shutters modelled on the historic original – street side of a villa in Zehlendorf
A further 6 windows on the street side were given huge shutters modelled on the historic original. The photos only hint at the size. The lower shutter leaves are 181 cm tall.
Dormer refurbishment timber façade
7 m of dormer façade renewed.
Shutters modelled on the historic original – garden side
6 windows on the garden side were given shutters modelled on the historic original. The complete refurbishment of the property will be finished at the end of the year and is a real eye-catcher. 🙂
Sharpening for chipper blades
Before and after picture.
Replacing a knife handle
Plastic handle scales go brittle at some point and break. Here’s a forged kitchen knife where I’ve remade these scales in oak. With proper care it’ll last indefinitely…. Linseed oil was used to seal it. Before: After: Kunststoffgriffschalen werden irgendwann spröde und brechen. Hier ein geschmiedetes Kochmesser, bei dem ich diese Schalen mit Eiche nach […]
Garden gate modelled on the historic original (replica)
The garden gate, made from pressure-treated pine, was built on the model of the historic original and belongs to a large fence. Die Gartentür aus kesseldruck-imprägnierten Kiefernholz, wurde nach historischem Vorbild gebaut und gehört zu einer großen Zaunanlage.
134m of fencing with 13 gates, built to a historic pattern
A Jägerzaun-style lattice fence built to a historic pattern, with angled cuts, set on a brick-built plinth course. Gates and posts with stainless steel caps and a brass bell. All gates are adjustable, and every single slat can be replaced on its own. All the timber in the fence is fully pressure-treated. Eine Jägerzaunanlage nach […]